The wrought-iron look without the wrought-iron price or maintenance. Hot-dip galvanized, powder coated tubular picket fencing for residential, commercial and industrial perimeters.
Every picket and rail is galvanized inside and out before powder coating — a duplex system built for decades outdoors.
| Panel heights | 1.2 / 1.5 / 1.8 / 2.1 / 2.4 m (custom available) |
|---|---|
| Panel width | 2.4 m standard (custom widths available) |
| Pickets | 25 × 25 mm or 19 × 19 mm square tube, pressed spear top |
| Rails | 40 × 40 mm square tube, 2 or 3 rails per panel |
| Posts | 60 × 60 / 65 × 65 / 75 × 75 mm SHS with caps; in-ground or base-plated |
| Top styles | Spear top, crushed spear, flat top, loop top |
| Surface treatment | Hot-dip galvanized + polyester powder coating (RAL 9005 standard) |
| Gates | Matching swing, sliding and cantilever gates |
| Certificates | ISO 9001 factory, CE compliant, SGS tested coating |
Pressed spear heads deter climbing while the clean tubular lines upgrade any property frontage.
Galvanized-inside-and-out tubes plus powder coating eliminate the maintenance cycle of wrought iron.
Pre-assembled 2.4 m panels bolt to posts with brackets — a two-person crew installs 50+ meters per day.
Swing, sliding and cantilever gates fabricated with identical pickets, tops and coating.
Custom heights, picket counts, rail positions, colors and branded packaging for importers and wholesalers.
Bundled panels with protective film load efficiently — a 40HQ holds roughly 1,500–2,000 panels depending on spec.
A spear top fence is a tubular steel picket fence whose vertical pickets are pressed into pointed spear heads above the top rail. It combines the classic look of wrought iron with modern galvanized steel construction, giving both security and appearance.
It delivers the same prestigious look at a fraction of the cost. Unlike wrought iron, every tube is hot-dip galvanized inside and out before powder coating, so it does not need repainting and will not rust from the inside.
Standard heights are 1.2 m, 1.5 m, 1.8 m, 2.1 m and 2.4 m with 2.4 m wide panels. Custom heights, picket spacing and rail configurations are available for project orders.
No — double protection prevents it. Tubes are hot-dip galvanized first, then polyester powder coated. This duplex system routinely delivers 10+ years of outdoor service without maintenance.
Yes. Swing gates, sliding gates and cantilever gates are fabricated to match the fence panels, with the same pickets, spear tops and coating.
RAL 9005 black is the standard and most popular color. Any RAL color — including green, bronze and custom matches — can be powder coated on request.
Send your perimeter length, preferred height and color — we reply with a drawing, container loading plan and factory-direct price within 24 hours.
HJ Fence
